The 2-Product Electric Spray Unit is built for applying two-part chemistries in sequence without pre-mixing. It delivers controlled, separate application for products that must remain isolated until the point of use.
the SP-JRV-2-RAC is designed for use with two-part products that are applied in series, but cannot be mixed together prior to application
2-Product Electric Spray Unit
compressed air, electricity
draws from pre-mixed solution
two products, simultaneously (one product per pump)
6 ft. (1.8m) clear hose with 1/4 in. (6.4mm) inside diameter
100 ft. (30.5m) twin-line hose with 1/4 in. (6.4mm) inside diameter
handheld double-barrel spray wand with two stainless steel 40˚ fan tips and two triggers
6 ft. (1.8 m)
using one side of the double-barrel spray wand = 0.75 gal/min
using both sides simultaneously = 1.38 gal/min
Viton
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
40-100˚F (4.4-37˚C)
120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
120 VAC
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.
