The 20 Gallon Fog Unit with 2 Nozzles and Timer is an air-powered, portable pre-mix system designed for consistent fogging. It includes a delay timer, two nozzles, and customizable seal and lid options to support a wide range of chemistries.
20 Gallon Fog Unit With 2 Nozzles and Timer
20 Gallon Fog Unit With 2 Nozzles and Timer - Operation Manual
compressed air and electricity
draws from pre-mixed solution
one product
20 gallons (75.7 liters)
3.7 gallons/hour per nozzle (7.4 gallons/hour total with 2 nozzles)
Santoprene, Viton, or Kalrez
single shot timer with delay
15 microns at 50 psi (3.4 bar)
1 liter of solution will cover approximately 1000 cubic feet
47 inches (119.3 cm)
approx. 3 hours
pneumatic fog nozzle
2
two 10 inch (25.4 cm) non-marking wheels
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
**area covered and run time may vary based on humidity, air flow, and product used.
50 psi with 7 cfm
40-100°F (4.4-37.8°C)
120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
120 VAC
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.