10 Gallon Mist Unit with 3 Nozzles and Timer

#MU-10N-3-TM

10 gallon air-powered, portable, pre-mix mist unit with three nozzles and a delay timer. Configurable with Viton, Kalrez, or Santoprene seals and lid color options.

HOW TO BUY

features

  • efficient air consumption (7.7 cfm, competing products consume 39 cfm)
  • timer version allows for situations where personnel need to be cleared from a space and/or overnight cleaning
  • deactivate unit from a distance
  • easy-to-use delay timer
  • 3 nozzles mounted on telescoping mist mast
  • 10 gallon (37.8 liter) tank
  • hinged back plate
  • natural color tank for easy product level visibility
  • hinged lid – available in 5 colors
  • front-facing drain
  • Santoprene, Viton, or Kalrez pump seals available
  • in-line strainer

Datasheet

10 Gallon Mist Unit with 3 Nozzles and Timer

Operation Manual

10 Gallon Mist Unit with 3 Nozzles and Timer - User Manual

power type

compressed air and electricity

chemical pickup type

draws from pre-mixed solution

number of products unit can draw from

one product

capacity

10 gallons (37.9 liters)

flow rate*

3.7 gallons/hour per nozzle (11.1 gallons/hour total with 3 nozzles)

pump seals

Santoprene, Viton, or Kalrez

timer operation type

single shot timer with delay

droplet size

15 microns at 50 psi

coverage area**

1 liter of solution will cover approximately 1000 cubic feet

product height

41 inches (104 cm)

run time from full tank**

approx. 1 hour

nozzle type

pneumatic mist nozzle

number of nozzles

3

fog mast height range

3.5-8.5 ft. (1.1-2.6 m)

wheel type

non-marking

*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

**area covered and run time may vary based on humidity, air flow, and product used.

compressed air requirements

50 psi with 9 cfm

liquid temperature range

40-100°F (4.4-37°C)

electrical requirements

120 VAC at 60 Hz, 2 amps (GFCI protected outlet)

operating voltage

120 VAC

chemical compatibility

Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals.  For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

options
PUMP SEAL MATERIAL
MU-10N Santoprene (standard) -3-TM
Viton (V)
Kalrez (K)

Add option codes to item number as shown. For standard options, no option code is needed. Examples:

  • MU-10N-3-TM (standard unit with Santoprene pump seals)
  • MU-10NV-3-TM (unit with Viton pump seals)

 

  • complete unit with 3 nozzles on telescoping mast and timer

How to Buy?

We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.

Improvce Your Experience

You’re using a web browser we don’t support. Try one of these options to have a better experience.