Features
- Drop station for central foam system
- Pump and nozzles sold separately
- One central pump distributes pre-mixed solution through header system
- Powered by compressed air
- Stainless steel ball valve and wand
- Stainless steel fluid fittings
- Color coding options: Discharge hose – 4 colors (BL, GN, YL, RD)
- Ability to padlock to box
Datasheet
Central Foam Station
User Manual
Central Foam Station, Central Foam and Spray Station, and Central Dual Foam Station
Questions?
- POWER TYPE
Central System
- CHEMICAL PICKUP TYPE
Supplied with pre-mixed solution from a central system
- NUMBER OF PRODUCTS UNIT CAN DRAW FROM
Supplied with one product
- DISCHARGE LINE LENGTH/DIAMETER
50 ft. (15 m) hose, with 3/4 in. (19 mm) inside diameter
- DISCHARGE WAND/TIP TYPE
7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
- OUTPUT DISTANCE
25-30 ft. (7-9 m)
- OUTPUT VOLUME
20-45 gal/min (75-170 l/min)
- FLOW RATE*
2 gal/min (7.6 l/min)
- PRODUCT HEIGHT
18 inches (45.7 cm)
- TUBING/FITTING SIZES
4 ft. (1.2 m) chemical inlet hose with 1/2 in. (12.7 mm) inside diameter and 1lb check valve
*Dilution rates and flow rates given are based on chemical viscosity of water and factory air pressure settings.
- COMPRESSED AIR REQUIREMENTS
40-80 psi (3.5 bar) with 5-10 cfm (141-283 l/min)
- LIQUID TEMPERATURE RANGE
40-100°F (4.4-37°C)
- CENTRAL SYSTEM REQUIREMENTS
Pre-mixed solution must be supplied by a properly sized header system at 2 gpm and 40-80 psi (3-5 bar)
- CHEMICAL COMPATIBILITY
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
- Control box
- Hose and hanger
- Wand
- User Manual
- Pump sold separately
Accessories
Wondering How to Buy?
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.