
Features
- One central pump distributes pre-mixed solution through header system
- Dropstations and doorway nozzles sold separately
- Powered by compressed air
Datasheet
Pump Unit for Central Doorway System
User Manual
Pump Unit for Central Doorway System
Questions?
- POWER TYPE
Compressed air
- CHEMICAL PICKUP TYPE
Draws from pre-mixed solution
- NUMBER OF PRODUCTS UNIT CAN DRAW FROM
One product
- SUCTION LINE LENGTH/DIAMETER
8ft. (2.4 m) hose with 3/8 in. (9.5 mm) inside diameter
- FLOW RATE*
3.5 gal/min (13.2 l/min) per pump
- PUMP SEALS
Santoprene, Viton, or Kalrez
- PRODUCT HEIGHT
13 inches (33 cm)
- TUBING/FITTING SIZES
1/2 in. (12.7 mm) outside diameter polyethylene tubing
*Dilution rates and flow rates given are based on chemical viscosity of water and factory air pressure settings.
- COMPRESSED AIR REQUIREMENTS
Air regulator (R25) factory set at 50 psi(3.4 bar). Operating range is 20-80 psi (1.4-5 bar) with 2 CFM
- LIQUID TEMPERATURE RANGE
40-100°F (4.4-37°C)
- CHEMICAL COMPATIBILITY
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
Accessories

Wondering How to Buy?
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.