- QUICK LINKS:
- Get A Quote
feature
- designed specifically for use with Sterilex products – part of the Sterilex EZBlend System >>
- transfer Sterilex from drums to EZBlend Foam Unit without drum pumps
- user-friendly color coding corresponds to Sterilex solution 1 and 2
- transfer each product at up to 3.5 gal/min (13.2 l/min)
- Viton pump seals for compatibility with Sterilex
- tool-free pump changes with our quick-change pump bracket
- chemically-resistant hybrid thermoplastic (TPE) hose
- weighted suction line with filter and check valve
- air regulator with filter
- strain relief on the discharge hose
- activation by polypropylene fill gun
- air-operated diaphragm pump with quick-release hose barbs
Datasheet
EZBlend Chemical Transfer Unit
User Manual
EZBlend Chemical Transfer Unit
Questions?
- power type
compressed air
- chemical pickup type
draws from concentrated product
- number of products unit can draw from
one product per pump, individually or simultaneously
- suction line length/diameter
8 ft. (2.4 m) hose with 1/2 in. (12.7 mm) inside diameter
- discharge line length/diameter
8 ft. (2.4 m) hose with 1/2 in. (12.7 mm) inside diameter
- discharge wand/tip type
polypropylene fill gun
- flow rate*
3.5 gal/min (13.2 l/min) per pump
- pump seals
Viton
*dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
- compressed air requirements
20-80 psi (1.4-5 bar) with 2 cfm (56 l/min)
- liquid temperature range
40-100˚F (4.4-37˚C)
- chemical compatibility
this unit is specifically configured for use with Sterilex liquid products
- complete unit with discharge hoses and suction lines
- mounting hardware for plate
- user manual
Accessories
Support Videos
How to Buy?
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.