
Features
- Efficient air consumption (12.5 cfm, competing products consume 39 cfm)
- Deactivate unit from a distance
- 3 nozzles mounted on telescoping fog mast
- 20 gallon (75.7 liter) tank
- Hinged back plate
- Natural color tank for easy product level visibility
- Hinged lid – available in 5 colors
- Front-facing drain
- Santoprene, Viton, or Kalrez pump seals available
- In-line strainer
Datasheet
20 Gallon Fog Unit with 3 Nozzles and Telescoping Mast
Questions?
- POWER TYPE
Compressed air
- CHEMICAL PICKUP TYPE
Draws from pre-mixed solution
- NUMBER OF PRODUCTS UNIT CAN DRAW FROM
One product
- CAPACITY
20 gallons (47.32 liters)
- FLOW RATE*
3.7 gallons/hour per nozzle (11.1 gallons/hour total with 3 nozzles)
- PUMP SEALS
Santoprene, Viton, or Kalrez
- DROPLET SIZE
15 microns at 50 psi
- COVERAGE AREA**
1 liter of solution will cover approximately 1000 cubic feet
- Height
47 inches (119.3 cm)
- RUN TIME FROM FULL TANK**
approx. 2 hours
- NOZZLE TYPE
Pneumatic Fog Nozzle
- NUMBER OF NOZZLES
3
- FOG MAST HEIGHT RANGE
3.5-8.5ft. (1.1-2.6 m)
- WHEEL TYPE
Non-marking
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
**Area covered and run time may vary based on humidity, air flow, and product used.
- COMPRESSED AIR REQUIREMENTS
50 psi with 9 cfm
- LIQUID TEMPERATURE RANGE
40-100°F (4.4-37°C)
- CHEMICAL COMPATIBILITY
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
- Complete unit with 3 nozzles on telescoping mast

Wondering How to Buy?
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.