Drum Rinse System


Triple rinse system for 15, 30, and 55 gallon drums. Choose between pre-programmed light or heavy rinse cycles to provide a thorough clean.



  • Designed for a wide range of incoming water pressures and flows
  • Durable nozzle for complete and thorough triple rinse
  • No timer programming required – works out of the box
  • Available in 15, 30, and 55 gallon drum size


55 Gallon Drum Rinse

Operation Manual

55 Gallon Drum Rinse

power type

water and electric

discharge line length/diameter

25 ft. (7.6 m) hose, with 3/4 in. (19 mm) inside diameter

flow rate (produced by unit)

9-17 gal/min (34.1-64.4 l/min)

timer operation type / water usage

repeat cycle (PLC controlled).
• 30 second triple rinse cycle – 13.5-25.5 gallons (51.1-96.5 liters)
3 cycles of – 30 seconds on, 15 seconds draining
• 60 second triple rinse cycle – 27-51 gallons (102.2-193.1 liters)
3 cycles of – 60 seconds on, 15 seconds draining

nozzle type

stainless steel spinner

tubing / fitting size

facility connection to water supply box: 1/2 in. FNPT

water requirements

minimum flow at water source: 9 gal/min (34.1/min). Note: If flow is less than 9 GPM, consider the boosted version

liquid temperature range

40-190˚F (4.4-87.8˚C)

electrical requirements

120 VAC at 60 Hz, 2 amps
(GFCI protected outlet)

operating voltage

120 VAC

chemical compatibility

this unit is designed to
function with water only

How to Buy?

We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.

Improvce Your Experience

You’re using a web browser we don’t support. Try one of these options to have a better experience.