Twin-line Central Foam System

#CFS-TL

Features

  • One central pump distributes pre-mixed solution through header system
    • Pump sold separately
  • Powered by compressed air
  • Designed for up-close cleaning
  • 25 foot (7.6 meter) coiled discharge tubing
  • 65° fan tip for increased coverage
  • Ability to add padlock to box

Datasheet

Twin-line Central Foam System

User Manual

Twin-line Central Foam System

POWER TYPE

Central System

CHEMICAL PICKUP TYPE

Supplied with pre-mixed solution from a central system

NUMBER OF PRODUCTS UNIT CAN DRAW FROM

Supplied with one product

DISCHARGE LINE LENGTH/DIAMETER

25 ft. (7.6 m) twin-line tubing, with 1/4 in. (6.35 mm) outside diameter (coiled and bonded)

DISCHARGE WAND/TIP TYPE

Polypropylene trigger handle with 65° fan tip

OUTPUT DISTANCE

406 ft. (1.2-1.8 m)

OUTPUT VOLUME

6 gal/min (22.7 l/min)

FLOW RATE*

1 gal/min (3.8 l/min)

PRODUCT HEIGHT

16 in. (40.6 cm)

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

COMPRESSED AIR REQUIREMENTS

40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)

LIQUID TEMPERATURE RANGE

40-100°F (4.4-37°C)

CENTRAL SYSTEM REQUIREMENTS

Pre-mixed solution must be supplied by a properly sized header system at 2 gpm and 40-80 psi (3-5 bar)

CHEMICAL COMPATIBILITY

Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

  • Control box
  • Hose and hanger
  • Wand
  • User Manual
  • Pump sold separately

Wondering How to Buy?

We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.

Improvce Your Experience

You’re using a web browser we don’t support. Try one of these options to have a better experience.