Central Doorway Foam Station
#GK2TWall mounted, pre-mix, foam drop station for doorways powered by compressed air and electricity. Supports up to two nozzle assemblies with a total of 25ft total distance with repeat cycle timers.
Wall mounted, pre-mix, foam drop station for doorways powered by compressed air and electricity. Supports up to two nozzle assemblies with a total of 25ft total distance with repeat cycle timers.
central system, electricity
supplied with pre-mixed solution from a central system
supplied with one product
2 gal/min (7.6 l/min)
repeat cycle
with one nozzle: 9×4 ft. (2.7×1.5m)
with two nozzles: 5×3 ft. (2.4×1.2m) at each nozzle
15 inches (38.1 cm)
single-line poly nozzle assembly (GK6T) (Sold separately)
one control box can support up to 2 nozzle assemblies
the combined distance between the control box and the nozzle(s) must equal 25 ft. (7.6 m) or less
designed for use with 1/2 in. (12.7 mm) outside diameter tubing between control box and nozzle(s)
*dilution rates and flow rates given are based on chemical viscosity of water and factory air pressure settings.
40-80 psi (3.5 bar) with 5-10 cfm (141-283 l/min)
40-100°F (4.4-37°C)
120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
120 VAC
pre-mixed solution must be supplied by a properly sized header system at 2 gpm and 40-80 psi (3-5 bar)
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.
We can’t clean your inbox, but we can help keep it interesting. Stay in the know on products, improvements, and other news.