Flooded Suction Tank
#FSTProvides consistent head pressure for metering pumps, eliminating the loss of prime and ensures dosing accuracy. Multi-level switch monitors high and low levels of chemistry, alerting users when attention is required.
- QUICK LINKS:
- Get A Quote
features
- connections for remote flashing light – light included
- set of contacts for integrating into external monitoring software
- LED status indicators on control board
- e-stop
- triple level sensor for fluid level – 3 stage float switch
- low-level monitoring
- high-level monitoring
- chemically resistant air operated valve
- wall mounted
- pulls from bulk container, extending metering pump life
Datasheet
Flooded Suction Tank
Operation Manual
Flooded Suction Tank - Operation Manual
Questions?
- power type
compressed air and electricity
- electrical operating voltage
24 VDC; power supply included
- rated load of relay signal terminals
8A 250VAC / 8A 30VDC
- chemical pickup type
draws from concentrated, pre-mixed, or ready-to-use product
- number of products unit can draw from
one product
- capacity
3.5 gallons (13.2 liters)
- fill rate
up to 2.5 gal/min (9.5 l/min)
- discharge valve type/material
polypropylene ball valve with EPDM seals
- pump seal
Santoprene, Viton, Kalrez
- air operated valve seal
EPDM, Viton, Teflon
- compressed air requirements
60-80 psi (4.1-5.5 bar) with 5-10 CFM (141.6-283.2 l/min)
- electrical requirements
100-240 VAC at 50-60 Hz, 1 amp (GFCI protected outlet)
- liquid temperature range
40-100˚F (4.4-37.8˚C)
- chemical compatibility
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
- complete unit
- user manual
How to Buy?
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.