
Features
- Easy-to-use walk-through sanitation for entryways and transition zones
- Users can enter from either side to smooth traffic flow in busy areas
- Walk-through design ensures compliance
- Low-moisture system
- Air-operated pump delivers a consistent amount of sanitizer (0.4 oz/11.81 mL) per spray
- Collection basin is easy to access or swap out for cleaning
- Draws from pre-mixed solution
- Works with our chemical jugs or your chosen chemical reservoir with ¼ in. suction line
- Powered by compressed air
- Easy to disassemble and clean
- Adjustable leveling feet
Datasheet
Walk-Through Footwear Sanitizing Unit
User Manual
Walk-Through Footwear Sanitizing Unit
Questions?

- POWER TYPE
Compressed air
- CHEMICAL PICKUP TYPE
Draws from pre-mixed solution
- NUMBER OF PRODUCTS UNIT CAN DRAW FROM
One product
- SUCTION LINE LENGTH/DIAMETER
3 ft (0.9 m) clear hose with 1/4 in. (6.4 mm) inside diameter
- OUTPUT VOLUME*
0.4 oz (11.83 mL)
- FLOW RATE*
0.4 oz (11.83 mL)
- PUMP SEALS
Viton
- NUMBER OF NOZZLES
8 nozzles
- PRODUCT DIMENSIONS
29.5 x 28 x 42 in. (74.9 x 20.3 x 106.7 cm)
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
- COMPRESSED AIR REQUIREMENTS
60-80 psi (4.1-5.5 bar) with 1 cfm (28.3 l/min)
Regulator not included with unit- LIQUID TEMPERATURE RANGE
40-100˚F (4.4-37˚C)
- CHEMICAL COMPATIBILITY
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
- Complete unit
- User manual
Accessories

Wondering How to Buy?
We have distributors all over the world. Tell us a little bit about you and your equipment needs, and we’ll help you find or become a distributor.